4d Systems Amazing 3.5" Display Module powered by a PIC32 PICadillo-35T Picadillo-35T Hoja De Datos
Los códigos de productos
Picadillo-35T
4D SYSTEMS PICadillo-35T Display Module
© 2014 4D SYSTEMS Page 25 of 31 www.4dsystems.com.au
Provided with the TFT Library, are a range of demo
applications specifically written for the PICadillo-
35T, which demonstrate some of the features of
the display module.
A repository of Fonts is also available from
Majenko Technologies, available for download
from here:
applications specifically written for the PICadillo-
35T, which demonstrate some of the features of
the display module.
A repository of Fonts is also available from
Majenko Technologies, available for download
from here:
Other libraries, such as BMPFile, and Widgets are
also available from Majenko Technologies
TFTLibraries
Github
repository,
which
are
compatible with the PICadillo-35T
Bootloader
9.3.
The PICadillo-35T utilises a bootloader which
enables the PIC32 Processor to be programmed
using the on board FTDI USB to Serial IC, by simply
connecting a USB cable between your PC and the
PICadillo-35T. If however you wish to change the
bootloader,
simply
connect
a
suitable
programming device on to the ICSP headers, such
as the PICKit3, and program the PIC32 as required.
Note: On the PICKit3 Programmer, the 3.3V
Output to ‘Power Target Circuit from Tool’ must be
enabled else the programmer will not see the
PIC32 processor, even though this 3.3V is not used
to power the PICadillo-35T itself.
The bootloader for the PICadillo-35T is available
for download from the PICadillo-35T product page
on
as the PICKit3, and program the PIC32 as required.
Note: On the PICKit3 Programmer, the 3.3V
Output to ‘Power Target Circuit from Tool’ must be
enabled else the programmer will not see the
PIC32 processor, even though this 3.3V is not used
to power the PICadillo-35T itself.
The bootloader for the PICadillo-35T is available
for download from the PICadillo-35T product page
on
the
4D
Systems
website,