Atmel ARM-Based Evaluation Kit AT91SAM9N12-EK AT91SAM9N12-EK Hoja De Datos
Los códigos de productos
AT91SAM9N12-EK
Tightly-Coupled Memory Interface
5-14
Copyright © 2001-2003 ARM Limited. All rights reserved.
ARM DDI0198D
Figure 5-7 State machine for generating a single wait state
In the WAIT state IRWAIT is asserted. In the COMPLETE state IRWAIT is
deasserted.
deasserted.
Certain types of memories can have different access penalties depending on whether an
access is sequential or nonsequential. The IRSEQ/DRSEQ signals indicate if an access
is sequential in the request cycle for an access, and are held HIGH during waited cycles.
This behaviour enables a loopback arrangement, where the SEQ output can be fed
directly back into the WAIT input through an inverter to produce a single cycle wait
state for nonsequential accesses as shown in Figure 5-8.
access is sequential or nonsequential. The IRSEQ/DRSEQ signals indicate if an access
is sequential in the request cycle for an access, and are held HIGH during waited cycles.
This behaviour enables a loopback arrangement, where the SEQ output can be fed
directly back into the WAIT input through an inverter to produce a single cycle wait
state for nonsequential accesses as shown in Figure 5-8.
Figure 5-8 Loopback of SEQ to produce a single cycle wait state
The cycle timing of the circuit shown in Figure 5-8 is shown in Figure 5-9 on page 5-15.
COMPLETE
WAIT
IRCS = 1
IRCS = 0
TCM
IRRD[31:0]
IRADDR[17:0]
IRCS
IRSEQ
IRWAIT