Atmel Evaluation Kit AT91SAM9X25-EK AT91SAM9X25-EK Hoja De Datos
Los códigos de productos
AT91SAM9X25-EK
222
SAM9X25 [DATASHEET]
11054E–ATARM–10-Mar-2014
Only PADs PA[20:15], PA[13:11] and PA[4:2] can be configured.
When programming 0x0 in fields, no delay is added (reset value) and the propagation delay of the pad buffers is the
inherent delay of the pad buffer. When programming 0xF in fields, the propagation delay of the corresponding pad is
maximal.
inherent delay of the pad buffer. When programming 0xF in fields, the propagation delay of the corresponding pad is
maximal.
Figure 23-9. Programmable I/O Delays
23.5.13 Programmable I/O Drive
It is possible to configure the I/O drive for pads PA[20:15], PA[13:11] and PA[4:2]. For any details, refer to the product
electrical characteristics.
electrical characteristics.
23.5.14 Programmable Schmitt Trigger
It is possible to configure each input for the Schmitt Trigger. By default the Schmitt trigger is active. Disabling the Schmitt
Trigger is requested when using the QTouch
Trigger is requested when using the QTouch
™
Library.
DELAY1
Programmable Delay Line
PIO
PAout[0]
PAin[0]
DELAY2
Programmable Delay Line
DELAYx
Programmable Delay Line
PAout[1]
PAin[1]
PAout[2]
PAin[2]