Atmel Evaluation-Board AT90USBKey AT90USBKey AT90USBKey-2 Hoja De Datos
Los códigos de productos
AT90USBKey-2
Using the AT90USBKey
2-14
AT90USBKey Hardware User Guide
7627A–AVR–04/06
Figure 2-10 . Connecting AVR JTAG ICE to AVRUSBKey
The Flash, EEPROM and all Fuse and Lock Bit options ISP-programmable can be
programmed individually or with the sequential automatic programming option.
programmed individually or with the sequential automatic programming option.
Note:
See AVR Studio® on-line Help for information.
2.6
Debugging
2.6.1
Debugging with AVR JTAG ICE mkII
The AT90USBKey can be used for debugging with JTAG ICE MK II.
Connect the JTAG ICE mkII as shown in Figure 2-10, for debugging, please refer to
AVR Studio® Help information.
AVR Studio® Help information.
When using JTAG ICE MK II for debugging, and as AT90USB parts are factory
configured with the higher security level set, a chip erase operation will be performed on
the part before debugging. Thus the on-chip flash bootloader will be erased. It can be
restored after the debug session using the bootloader hex file available from ATMEL
website.
configured with the higher security level set, a chip erase operation will be performed on
the part before debugging. Thus the on-chip flash bootloader will be erased. It can be
restored after the debug session using the bootloader hex file available from ATMEL
website.