Olimex Development board with UEXT connector and 10 MBit ENC28J60 Ethernet controller MOD-ENC28J60 MOD-ENC28J60 Manual De Usuario
Los códigos de productos
MOD-ENC28J60
INTRODUCTION
MOD-ENC28J60
is development board with UEXT connector and 10 Mbit
ENC28J60 ethernet controller from Microchip Technology Inc.
BOARD FEATURES
–
MOD-ENC28J60 is the easiest way to add 10 Mbit ethernet connectivity to any
of our boards with UEXT connector
of our boards with UEXT connector
–
ENC28J60 Ethernet controller with UEXT connector for easy connection to our
other development boards with UEXT connector
–
LAN connecttor with build in transformer
–
two status LEDs on LAN connector
–
SPI interface takes only few pins to add Ethernet interface to your
microcontroller project
microcontroller project
–
UEXT 10 pin interface on 0.1" row pins header
–
backward compatibility with ENC28J60-H with 2 x 5 pin header
–
PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
–
Dimensions: 40x24 mm (1.55 x 0.95")
–
space between the pin rows: 20 mm (0.8")
ELECTROSTATIC WARNING
The MOD-ENC28J60 board is shipped in protective anti-static packaging. The board
must not be subject to high electrostatic potentials. General practice for working
must not be subject to high electrostatic potentials. General practice for working
with static sensitive devices should be applied when working with this board.
BOARD USE REQUIREMENTS
Hardware:
use ENC28J60
Page 2