Olimex Open Source Hardware Industrial grade PINGUINO MAPLE ARDUINO like development board PIC32-PINGUINO-OTG PIC32-PINGUINO-OTG Manual De Usuario
Los códigos de productos
PIC32-PINGUINO-OTG
ORDER CODE:
PIC32-PINGUINO – fully
assembled and tested board
PIC32-PINGUINO-OTG – fully
assembled and tested board
for more info.
Revision history:
Board's revision
Rev. C, March 2011
Rev. D, March 2012
–
Changed various names on the top and the bottom of the board
–
Removed C14 - 2.2uF, C15 - 2.2uF, VR2-MCP1700T-3302E/MB; Added L2-
FB1206 – because of random hangs of the PIC32 in specific cases
FB1206 – because of random hangs of the PIC32 in specific cases
–
Removed C20 – was filtering not only the button bounce but some of the higher
frequencies which we decided to change
Manual's revision
Rev. A, August 2011
–
At first page “Copyright(c) 2011, OLIMEX Ltd, All rights reserved” is replaces with
“Designed by OLIMEX Ltd., 2011”
–
In schematic “COPYRIGHT(C) 2011, OLIMEX Ltd.” replaced with “DESIGNED BY
OLIMEX LTD, 2011”
Rev. B, October 2011
–
In “BOARD USE REQUIREMENTS” added more information about cables;
“Hardware” and “Warning”
–
The picture for USB on-the-go connector is changed
Rev. C, March 2012
–
Removed “10 .We use separate voltage regulator for the Analog part, which allow the ADC
to be read correctly without the digital noise pickup.”
to be read correctly without the digital noise pickup.”
–
Updated schematic with board version D
–
Various spelling changes and page formatting
Rev. D, October 2012
–
Adjusted the manual for both PIC32-PINGUINO and PIC32-PINGUINO-OTG
–
Updated disclaimer
–
Updated schematic with board version D
Page 17