Conrad Energy remote control ARF 2320 mm FMS023 Hoja De Datos

This product is an electrically powered model plane with radio remote control through a remote control system. The 

model is intended for outdoor use and must only be flown on days with little wind. The model airplane is pre-assem-

bled and is delivered with built-in remote control and drive components. 
The product must not become damp or wet.
The product is not suitable for children under 14 years of age.

  Observe all safety information in these operating instructions. They contain important information on 

handling of the product.

 

You are solely responsible for safe operation of the model!

The electrical flight model „Fox“ is a pre-fabricated ARF model (ARF = „Almost Ready to Fly“), that is made ready for 

use in just a few steps. All drive and control components are built-in and ready for use. 
The flight model is controlled (motor speed, flight direction, flight height) via a radio remote control that must be 

purchased separately. The flight modes is suitable for model plane beginners who have collected some initial 

experience with similar models.

•  Fuselage
•  Elevator rudder
•  Left and right wings
•  Wing rod
•  Small parts (e.g. screws)
•  Operating Instructions 

  Operation also requires a radio remote control with at least 5 channels (we recommend a computer remo-

te control system with 6 or more channels), a flight battery (3 cells LiPo, 11.1 V, 1200 mAh and up, 25C), a 

suitable high-voltage plug system and a charger with charging cable.