Reely 1:10 RC model car Electric Truggy FS-53328-6 Manual De Usuario
Los códigos de productos
FS-53328-6
56
g) Steering
This part may have been delivered preassembled and
only part "C1" has to be inserted into the sleeve "C3"
from the bottom so that the steering can be installed on
the chassis plate. See illustration on the right.
only part "C1" has to be inserted into the sleeve "C3"
from the bottom so that the steering can be installed on
the chassis plate. See illustration on the right.
Use two countersunk screws (M3x6mm) to screw the steering to
the chassis as shown in the illustration bottom right.
the chassis as shown in the illustration bottom right.
The servo saver (part with a spring "C7") serves to protect the servo
from acting forces transmitted through the steering.
from acting forces transmitted through the steering.
C1
C3
C2
C7
C6
C5
C4
SR1
SR2
SR2