Mc Crypt LED bar No. of LEDs: 160 LB160 LB160 Hoja De Datos
Los códigos de productos
LB160
22
2. Intended Use
The LED bar is used to generate light effects in light show equipment, party rooms, etc. and is controlled by the built-in
controller or an external DMX controller.
This product is only approved for connection to 100-240 V/50/60 Hz alternating current and only for use with an
This product is only approved for connection to 100-240 V/50/60 Hz alternating current and only for use with an
earthed mains socket.
The DMX connection must only be connected to suitable DMX controllers or other DMX effect lights with DMX con-
The DMX connection must only be connected to suitable DMX controllers or other DMX effect lights with DMX con-
nections.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
The entire product must not be modified or converted, and the casing must not be opened.
Observe all safety and assembly notes in these operating instructions!
3. Explanation of Symbols
This symbol on the device indicates that the user must read these operating instructions before
using the product and observe them during operation.
The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from
electric shock. The device contains no parts that require servicing by the user. Therefore, never
open the device.
The exclamation mark indicates important notes in these operating instructions that must be
strictly observed.
The arrow symbol indicates special advice and operating information.
This symbol indicates that the product must only be used indoors.
...m
This symbol indicates the minimum distance to the illuminated surfaces.