3D Systems 350166 Hoja De Datos

SETTING PRINT JET GAP

When the Cube is operating, the print tip on the print jet nozzle becomes hot; avoid touching

this area until it has cooled down.

The print tip must be set to the correct distance between the print tip and the print pad to ensure the first printed layer sticks
properly.

1. Finger tap “Set Up” on the touchscreen and press “Next” until “Set Gap” appears.

1. Place print pad magnetic strip onto the magnetic strip on print plate.

PRINT PAD INSTALLATION

Tap Here

Rough side of print pad

is facing up