Emko ESM-3711-H.5.05.0.1/00.00/1.0.0.0 ESM-3711-H.5.05.0.1/00.00/1.0. Hoja De Datos
Los códigos de productos
ESM-3711-H.5.05.0.1/00.00/1.0.
5. Failure Messages in ESM-
Heating Controller
3711-H
Heating Controller
SET
°C
PR
ESM - 3711-H
SV
Heating Controller
SET
°C
PR
ESM - 3711-H
SV
Heating Controller
SET
°C
PR
ESM - 3711-H
SV
2- Blinking the Screen Value
If temperature higher than the alarm
parameters limit, value on the screen starts to
blink
If temperature higher than the alarm
parameters limit, value on the screen starts to
blink
29
Example-2 :
If alarm function selection parameter
in programming section is 1 (Absolute
Alarm) and maximum alarm parameter
If alarm function selection parameter
in programming section is 1 (Absolute
Alarm) and maximum alarm parameter
is 50
When temperature is above 50 °C, value
on the screen starts to blink. Also buzzer
function selection parameter
on the screen starts to blink. Also buzzer
function selection parameter
is 2 or
4, then internal buzzer is on.
Example-1 :
If alarm function selection parameter
In programming section is 1(Absolute
alarm) and minimum alarm parameter
If alarm function selection parameter
In programming section is 1(Absolute
alarm) and minimum alarm parameter
Is 20 ;
When temperature is less than 20
, then internal buzzer is on.
°C, value
on the screen starts to blink. Also if buzzer
function selection parameter
function selection parameter
is 2 or 4
1- Probe failure in analog inputs.
When this message is on the
screen, if buzzer function selection
parameter
parameter
is 3 or 4 , internal buzzer
starts to operate.
Sensor
connection is wrong or there is no sensor
connection.
connection.