Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Hoja De Datos
Los códigos de productos
6ED1057-3BA00-0AA8
Configuring LOGO!
8.1 Selecting parameter assignment mode
LOGO!
Manual, 06/2014, A5E33039675
Manual, 06/2014, A5E33039675
257
● Menu command ③
For information on the various settings, refer to the topic "Configuring network settings
(Page 99)".
● Menu command ④
For information on the various settings, refer to the topic "Diagnosing errors from LOGO!
(Page 105)".
8.1.1
Parameters
Note
You can only view and edit parameters in the parameter assignment mode when they have
You can only view and edit parameters in the parameter assignment mode when they have
the read/write ("+") designation. See the "Parameter protection (Page 129)" topic and the
"Synchronization (Page 96)" topic.
Parameters are, for example:
● The delay times of a timer relay
● The switching times (cams) of a timer switch
● Counter thresholds
● The monitoring time for hour counters
● The trigger thresholds
A block number (Bx) and the short name of the parameter identifies each parameter.
● The delay times of a timer relay
● The switching times (cams) of a timer switch
● Counter thresholds
● The monitoring time for hour counters
● The trigger thresholds
A block number (Bx) and the short name of the parameter identifies each parameter.
Examples:
● T: ...is a configurable time
● MI: ...is a configurable time interval
● T: ...is a configurable time
● MI: ...is a configurable time interval
Note
LOGO!Soft Comfort also allows you to assign names to blocks (for more information, refer to
LOGO!Soft Comfort also allows you to assign names to blocks (for more information, refer to
the chapter entitled "LOGO! Software (Page 283)".