Hamlin MDCG-4 Hoja De Datos
10
MDCG-4 Features and Benefits
DIMENSIONS (in) mm
Notes
1) For details on electrical specifications, contact Hamlin.
2) Contact rating-Product of the switching voltage and current should never exceed the
wattage rating.
Contact Hamlin for additional load/life information.
Contact Hamlin for additional load/life information.
3) Operate (inc. bounce) /Release Time-per EIA/NARM RS421A, diode suppressed coil.
4) Pull in Range-Contact Hamlin for tolerances available within this range.
5) Rating Sensitivity-The value at which contact ratings and operating characteristics are
determined. Derating may be required below this value.
6) Storage Temperature-Long time exposure at elevated temperature may degrade
solderability of the leads.
Switch Type
MDCG-4
Contact Form
A
Underwriters Laboratories Recognised, File E47258 (see note 1)
ELECTRICAL RATINGS
Contact Rating (2)
Watt - max.
10
Voltage
Switching
Vdc - max.
200
Breakdown
Vdc - min.
250
Current
Switching
A - max.
0.5
Carry
A - max.
1.2
Resistance
Contact, Initial
Ω - max.
0.100
Insulation
Ω - min.
10
10
Capacitance
Contact
pF - typ.
0.2
Temperature
Operating
°C
-40 to +125
Storage (6)
°C
-65 to +125
OPERATING CHARACTERISTICS
Operate Time (3)
ms - max.
0.6
Release Time (3)
ms - max.
0.2
Shock
11ms
1
⁄
2
sine wave
G - max.
100
Vibration
50-2000 Hertz
G - max.
30
Resonant Frequency
Hz - typ.
3900
MAGNETIC CHARACTERISTICS
Pull-In Range (4)
Ampere Turns
12-38
Rating Sensitivity (5)
Ampere Turns
20
Test Coil
L4989
Features
•
Sub-miniature normally open
switch with 15.24mm x 2.28mm
(0.600” x 0.090”) glass envelope
switch with 15.24mm x 2.28mm
(0.600” x 0.090”) glass envelope
•
Capable of switching up to
200Vdc
200Vdc
•
Maximum contact rating 10
Watts
Watts
•
10
10
Ohms insulation resistance
•
Available sensitivity range
12-38 AT
12-38 AT
•
Surface mount version available
Benefits
•
Hermetically sealed switch
contacts are not effected by and
have no effect on their external
environment
contacts are not effected by and
have no effect on their external
environment
•
Low, stable contact resistance
•
Low space requirement
•
Zero operating power required
for contact closure
for contact closure
•
Fit and forget durability
•
Well suited to signal switching
applications
applications
Applications
•
Reed relays
•
Security
•
Limit switching
•
Telecoms
•
Office equipment
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information
specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information
specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
Hamlin USA
Tel: +1 920 648 3000
•
Fax: +1 920 648 3001
•
Email: sales.us@hamlin.com
Hamlin UK
Tel: +44 (0)1379 649700
•
Fax: +44 (0)1379 649702
•
Email: sales.uk@hamlin.com
Hamlin Germany Tel: +49 (0) 6181 953660
•
Fax: +49 (0) 6181 9536666
•
Email: sales.de@hamlin.com
Hamectrol France Tel: +33 (0) 1 4687 0202
•
Fax: +33 (0) 1 4686 6786
•
Email: sales.fr@hamlin.com
www.hamlin.com
ISSUE No: 4 DATE: 1/5/3