Solar Trend 03030 Hoja De Datos
Instruction Manual
Solar Power Set 30 Watt Article No. 03030
Distribution by Süd Solar GmbH, Max-Eyth-Str. 6, 71732 Tamm (Germany)
Copyright © Süd Solar GmbH, 2011. Subject to modifications.
www.sued-solar.de
Copyright © Süd Solar GmbH, 2011. Subject to modifications.
www.sued-solar.de
REV-1-17-10-11
1. Introduction
Dear customer. Thank you for purchasing one of our products.
This product corresponds to the applicable European directives and National regulations.
Conformity has been proven. Relevant declarations and documents are deposited at the manufacturer.
2. Security Advices
This product corresponds to the applicable European directives and National regulations.
Conformity has been proven. Relevant declarations and documents are deposited at the manufacturer.
2. Security Advices
For damages caused by disregard of this instruction manual, the right of guarantee expires! For further
damages we do not accept any liability! For material or personal damage which occurs because of
inappropriate use or disregard of the security advices, we do not accept any liability. In such cases any
right of guarantee expires. Due to security reasons (CE) any alteration is not permitted.
The device is no toy. Keep away from children.
damages we do not accept any liability! For material or personal damage which occurs because of
inappropriate use or disregard of the security advices, we do not accept any liability. In such cases any
right of guarantee expires. Due to security reasons (CE) any alteration is not permitted.
The device is no toy. Keep away from children.
3. Appropriate Use, Installation and connection
The solar module is destined for outdoor use and the recovery of solar energy.
At installation please pay attention to the correct polarity!
Follow the designations PLUS (+) and MINUS (-)!
In the following you can see the drawing for the connection of all components of the charge/discharge controller (article no. 03155):
At installation please pay attention to the correct polarity!
Follow the designations PLUS (+) and MINUS (-)!
In the following you can see the drawing for the connection of all components of the charge/discharge controller (article no. 03155):
4. Continuance Commissioning
6. Purchase a 12V rechargeable battery suitable for this task having enough capacity (Ah) to serve as energy storage. A such
rechargeable battery with approx. 36 Ah is recommended. Special rechargeable solar batteries are offered on
www.sued-solar.de.
www.sued-solar.de.
7. Turn the consumer (the load) only on after having the battery sufficiently charged with the aid of the solar module.
4. Commissioning
1. Take all parts carefully out of the packaging.
2. Position the solar module (article no. 03150) at
a very suitable place with direct insolation. Lay
all cables carefully and safely.
all cables carefully and safely.
3. First attach the battery connecting cable
(article no. 80083) suitable for a 12V battery
(battery is no included in delivery!) to the two
connections in the middle. Connect the lead
marked with PLUS (+) with „B+“ and the lead
marked with MINUS (-) with „B-“.
(battery is no included in delivery!) to the two
connections in the middle. Connect the lead
marked with PLUS (+) with „B+“ and the lead
marked with MINUS (-) with „B-“.
4. Then connect the solar module with the two
left connections. Connect the lead marked with
PLUS (+) with „S+“ and the lead marked with
MINUS (-) with „S-“.
PLUS (+) with „S+“ and the lead marked with
MINUS (-) with „S-“.
5. Finally attach the consumers (the load), for
example the LED flash light (article no. 03100)
with the two right connections. Connect the
lead marked with PLUS (+) with „L+“ and the
lead marked with MINUS (-) with „L-“.
with the two right connections. Connect the
lead marked with PLUS (+) with „L+“ and the
lead marked with MINUS (-) with „L-“.