TP-LINK M7350 Manual De Usuario
M7350
LTE-Advanced Mobile WiFi User Guide
-4-
The screen Indication:
Item
Description
Indication
/
/
Network type &
Signal strength
Indicates the current network option: 2G /3G /4G, and
signal strength of current network.
Internet connection Indicates the successful network connection.
Data Roaming
Indicates you are in roaming service.
Wi-Fi connection
Displays the Wi-Fi status and the amount of current
wireless clients.
SMS
Indicates that there is un-read short message(s) and the
amount of un-read messages.
Battery
Displays the remaining battery power.
Download speed
Indicates the download speed of current data transmission.
Upload speed
Indicates the upload speed of current data transmission.
Data statistics
Indicates the data used in total. The data statistics will be
cleared after resetting the Device.
Table 1-1 The screen details
Note:
When you leave alone the buttons on the device, the screen will light on for 15 seconds and
then turn off. Pressing the power button will light up or turn off the screen.
then turn off. Pressing the power button will light up or turn off the screen.
Power Button: When the Device is successfully installed, and it’s powered (either by
battery or electricity); press this button until the screen appears
battery or electricity); press this button until the screen appears
to turn on
the Device, and if you want to turn it off, please press this button until the screen appears
“Power off”.
“Power off”.
Micro USB Port: It’s for you to connect the Device with the power adapter (attached in the
package) via the USB cable.
RESET Button (hole): It’s the button to restore the Device to its factory defaults. With the
Device powered on, use a pin to press and hold the RESET button (hole) for about 5
seconds, until the screen displays “Reboot”; then release the button and wait the Device to
reboot and restore its factory default settings.
Device powered on, use a pin to press and hold the RESET button (hole) for about 5
seconds, until the screen displays “Reboot”; then release the button and wait the Device to
reboot and restore its factory default settings.