Silex Technology WLAN receiver 1 port 54 Mbit/s 2.4 GHz Serial WLAN Device Server SX-500-1033 Manual De Usuario
Los códigos de productos
SX-500-1033
SX-500 User’s Guide
Page
9
Section 3: Configuration and Management
Configuration Options
After the hardware installation has been successfully completed, the Serial Server can be configured and managed
via an Ethernet and/or wireless connection using the ExtendView Utility (recommended), the embedded web (HTTP)
server pages, or the Serial Server’s internal configuration console, which can be accessed via a Telnet connection or
directly through the Serial Server’s serial port. Additional options for configuration and management of the Serial
Server are available as third-party utilities that can be downloaded from their respective web sites as noted below. If
you are using a wireless Serial Server, you can still configure it via an Ethernet connection or optionally configure it
via a wireless connection.
via an Ethernet and/or wireless connection using the ExtendView Utility (recommended), the embedded web (HTTP)
server pages, or the Serial Server’s internal configuration console, which can be accessed via a Telnet connection or
directly through the Serial Server’s serial port. Additional options for configuration and management of the Serial
Server are available as third-party utilities that can be downloaded from their respective web sites as noted below. If
you are using a wireless Serial Server, you can still configure it via an Ethernet connection or optionally configure it
via a wireless connection.
ExtendView Utility
a Windows TCP/IP utility used for configuring the Serial Server’s port, network, and wireless
settings.
settings.
uses a 32-bit graphical user interface.
works with Windows PCs running the TCP/IP protocol.
included on the Serial Server installation CD.
can be downloaded from the silex web site:
USA:
http://www.silexamerica.com
after installation, this utility can be run from the START menu.
Installing the ExtendView Utility (Windows operating
systems):
systems):
1. Ensure your PC is connected and has access to your network.
2. Connect an available Ethernet cable from your network hub to the Serial Server. Ensure the
Serial Server is powered ON.
3. Insert the CD supplied with your Serial Server into the CD-ROM drive of your computer. The CD
should automatically start and display a menu screen. Click on Install Software.
4. Click
on
ExtendView. After the installation is complete, you can start the ExtendView utility by
clicking on Start, Programs, and then ExtendView.
Web Browser Interface
allows you to configure the Serial Server with a standard web browser (e.g., Firefox or Internet
Explorer).
Explorer).
no additional software is needed on the system.
can be used on any system that supports web browser capabilities.
type the IP address into your web browser address bar to connect.
the default password is ACCESS (not case sensitive).
HP Web JetAdmin Utility
a web browser-based utility (works with browsers like Internet Explorer or Firefox).
can be downloaded from the HP web site
.