Monster Power AVS 2000 Voltage Stabilizer 109291 Manual De Usuario

 1.   Digital “Output/Input Voltage” Meter: Indicates Output or Input voltage.

 2.   Digital “Voltage Correction” Meter: Indicates the amount of voltage being increased or decreased in an effort 

to maintain a consistent 120 volts.

 3.   Digital “Current Usage” Meter: Indicates amperage draw.

  4.  “Ground OK” Indicator: Indicates the wall outlet that Monster AVS 2000 is plugged into is properly grounded.

 5. “Surge Protected” Indicator: Indicates Monster AVS 2000’s internal surge protection circuit is active.

  6.  “Line and Neutral OK” Indicator: Indicates the wall outlet that Monster AVS 2000 plugged into is properly wired.

  7.  “Sequential Power ON/OFF” Switch: Once the Automatic Voltage Stabilizer is plugged into a properly grounded 

120 volts (nominal) outlet, pressing this button will provide AC power to the components plugged into the Automatic 

Voltage Stabilizer’s Switched and Switched (Timed) outlets. Pressing this button again will turn off the Switched 
and Switched (Timed) outlets. (Unswitched outlets remain on at all times.)

  8.  “Switched Outlets On” Indicator: Indicates components plugged  into the “switched” outlets will receive power 

when the ON button is pressed.

  9.  “Input Voltage and Display Dimmer” Button: Indicates output voltage meter (press and release). 

Adjusts the brightness of the digital meters (press and hold). 

10. “Abnormal Voltage Condition” Indicator: Indicates the incoming voltage is below approximately 80 volts AC

or above approximately 140 volts AC.