X4-LIFE Wireless Bell 701393 Hoja De Datos

Frequency   

433 MHz

Protection transmitter 

IPX7

Operating Voltage Receiver  220 – 240 V AC /50 Hz
Melodies  

25

Reach 

 

max. 100 m (Free-field range)

Dimensions Transmitter 

79 x 44 x 32 mm

Dimensions receiver 

78 x 50 x 65 mm

Before you mount the device, please run a quick test.
Plug the receiver into a provided socket. The receiver will work better if 
there are no other electric devices in close range. Please try to adjust the 
receiver according to the “Range Guide”. 

To enter the learning mode press button B at the side of the receiver for 
about 5 seconds. The control lamp will start to blink. The device is now 
in learning mode.

Press the transmitter twice. The control lamp of the receiver will start to 
blink. The transmitter is now connected with the receiver. 

The eco-doorbell-kit will leave the learning mode automatically. If this is 
not the case you can leave the learning mode manually by pressing the 
transmitter twice. 

To connect additional transmitters to a receiver you have to proceed as 
described in step  “Learning Mode”. Note that you can only connect a 
maximum  of 3 transmitters to every receiver.

To connect one transmitter with multiple receivers you have to proceed 
as described in step “learning mode” for every receiver. Note that there is 
no limit for receivers that are connected to a transmitter.

Shortly press button C at the side of the receiver to switch through three 
different volumes.

Shortly press button B at the side of the device to enter the selection 
of 25 melodies. With every other press you can switch through all the 
melodies and choose your favorite one.

Press button C at the side of the receiver for at least 5 seconds. The 
control lamp will start blinking. It will take 3 seconds to switch to silent 
mode. To leave silent mode you just have to shortly press button B or C. 

Clean the surface where you intend to mount the transmitter as well as 
the back of the transmitter itself. Before mounting the Transmitter please 
run a test. Put both, transmitter and receiver where you want to mount 
them and close all doors. If the receiver does not react or makes no 
sound, please see Trouble Shooting.

Mounting the Transmitter with screws

• Take off the Transmitter from the socket by pushing it upwards.
•  Drill holes into the wall at the place you want the Transmitter to be fixed.
• Place the socket on to the required place on the wall.
• Fix the socket with two screws.
• Fix the transmitter to the socket again by pushing it downwards.

Mounting the Transmitter with double sided adhesive pad
Stick the transmitter to the wall with the double sided adhesive pad and 
press it for about 30 seconds to make sure it will not fall down.

Electrical- and electronic devices must never be disposed of in the regular 
household waste! 

      Consumers are legally obligated and responsible for the 

proper disposal of electronic and electrical devices by 
returning them to collecting sites designated for the 
recycling of electrical and electronic equipment waste. For 
more information concerning disposal sites, please contact 
your local authority or waste management company.

No liability will be taken for modifications or mistakes regarding the 
technical data or product features described in this user manual.

All rights reserved. Any reproduction, transfer, duplication or filing of 
this user manual or parts of it, as well as the translation into a foreign 
language or computer language is prohibited without the explicit 
approval of the manufacturer. Due to the fast advancement of these 
products, no guarantee of completeness can be given. Modifications in 
technique and configuration are subject to change at any time.

To receive a digital copy of this user manual, please contact our service 
department:

E-Mail: service@lived-non-food.de
Phone:  +49 531 224356-82

You receive a voluntary 2-year manufacturer guarantee, starting at 
purchase date, for material and production defects of the product. This 
guarantee is applicable in Germany, Austria and Switzerland. The receipt 
counts as a proof of guarantee. Within the guarantee period we will repair 
all material and manufacturer defects free of charge. Your statutory 
warranties remains unaffected by this guarantee.

• in case of damages which have arisen after improper use
• for wear parts / accessories that are subject to natural wear and tear
• for defects that are known to the customer at purchase
• in case of damages that occurred due to repair or intervention of the

buyer or an unauthorized third party

• in case the device was connected to a higher voltage as stated on the

device

• when dropping the device or single elements of it
• for improper transportation or packaging
• damages that occurred due to force majeure
• for non-observance of valid safety precautions
• for non-observance of the manual

Batteries / rechargeable batteries are not covered by
the guarantee as they are parts of consumption

In case of a guarantee claim, the date of sale has to be proven by receipt 
or invoice. Replacements for reasons covered by the guarantee do not 
lead to an extension of the original guarantee period, neither for the 
device itself nor for any replaced components. If you are claiming a valid 
guarantee, we are entitled to choose whether we will repair the device 
free of charge or exchange it for a new device. Any further claims are 
excluded. Parts replaced will pass into our property. We reserve the right 
to change defective parts or products against follow-up models.   

Please always contact us before you return your product.

Provided that a return shipment has been agreed, send the defective 
product securely packaged at your own cost to our service department:

It is absolutely necessary that you add a copy of your receipt to your 
return shipment. Repairs carried out after the guarantee period are 
subject to a charge. We will not accept freight collect shipments and will 
return them to the sender.