Samsung CLT-K4072S Hoja De Datos
Material Safety Data Sheet
5. FIRE-FIGHTING MEASUARES
A) Suitable (and unsuitable) extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
B) Extinguishing media: Water (Sprinkle with water), Foam, Powder, CO2 or Dry chemical.
6. ACCIDENTAL RELEASE MEASURES
A) Personal precautions, protective equipment and emergency procedures
Avoid inhalation, ingestion, eye and skin contact in case of accidental toner release.
B) Environmental precautions and protective procedures
○ Atmosphere Not available
○ Land Not available
○ Underwater Prevent product from entering drains.
C) The methods of purification and removal
○ Small spill
Remove source of ignition. Carefully wipe off with paper or wet cloth, avoiding inhalation of fine dust.
○ Large spill
Remove source of ignition and keep unnecessary and unprotected personnel away from area. Wear
protective gear: respirator, rubber gloves, goggles. Do not use vacuum cleaner when a large amount is
released. It, like most finely divided organic powders, may create a dust explosion. Fine powders may require
special vacuum filters; damp mopping or washing is preferred. Wipe up remainder with a wet cloth. Sweep,
mop or wipe up and contain for salvage or disposal. Avoid dust formation.
protective gear: respirator, rubber gloves, goggles. Do not use vacuum cleaner when a large amount is
released. It, like most finely divided organic powders, may create a dust explosion. Fine powders may require
special vacuum filters; damp mopping or washing is preferred. Wipe up remainder with a wet cloth. Sweep,
mop or wipe up and contain for salvage or disposal. Avoid dust formation.
7. HANDLING AND STORAGE
A) Precautions for safe handling
Never open the toner container. To avoid damage to cartridge and accidental contact with toner, keep out of
reach of children. Try not to disperse the particles. Avoid inhalation of dust and contact with eyes. Keep
away from excessive heat, sparks and open flames.
reach of children. Try not to disperse the particles. Avoid inhalation of dust and contact with eyes. Keep
away from excessive heat, sparks and open flames.
B) Conditions for safe storage
Keep the toner container tightly closed and store in a cool, dry and dark place keeping away from fire. Keep
away from children and Keep out of reach of children.
away from children and Keep out of reach of children.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
A) Control parameters (as total dust)
OSHA-PEL
(USA):
15mg/m
3
ACGIH-TLV (USA): 10mg/m
3
DFG-MAK (EC): 6mg/m
3
Work safe-TWA (Austl.): 10mg/m
3
B) Appropriate engineering controls
Use in a well ventilated area. Ventilator is not required when used in intended in printer,.
C) Personal protective equipment
○ Respiratory protection
Not normally required. For large spills, use dust respirator mask during cleanup.
○ Eye/Face protection
Not normally required. For large spills, use safety goggles during cleanup.
○ Skin protection
Not normally required. For large spills, use rubber gloves during cleanup.
○ Other: For use other than normal customer-operating procedures (such as in bulk toner processing
facilities), goggles and respirators may be required.
D) Hygiene Measures: Wash hands after handling