DELL E2313H 905-XT168-UK Hoja De Datos

Right-click the printer you just created, and then click Printer properties (Properties for Windows Vista and 

Windows Server 2008). 

On the General tab, click Print Test Page. When a test page prints successfully, installation is complete. 

This section provides information for Wi-Fi Direct printing. Wi-Fi Direct allows your Wi-Fi mobile devices such as 

computers, smart phone, and tablets, to connect to the printer directly via a Wi-Fi network. With Wi-Fi Direct, you 

can print documents, photos, or e-mail on your Wi-Fi mobile devices directly without a wireless access point. 

Wi-Fi Direct is available when the optional wireless adapter is installed. 

Wi-Fi Direct is available even if the printer is connected to your wireless network connection using the optional wireless 

adapter. 

Only printing function is available via the Wi-Fi Direct network. 

The maximum number of devices that can be connected via the Wi-Fi Direct network is 1. 

You cannot connect your mobile device to the internet via the printer’s Wi-Fi Direct network. 

Depending on the device, the channel used to connect the device to the printer via Wi-Fi Direct may differ from the 

channel used by the printer to connect to a network via Wi-Fi infrastructure mode. In such a case, simultaneous connection with 

Wi-Fi Direct and Wi-Fi infrastructure mode may not work properly. 

The printer connected with Wi-Fi Direct supports the following protocols; LPD, Port9100, WSD (print), Bonjour (mDNS), 

SNMPv1/v2c, Dell Printer Configuration Web Tool. 

To use Wi-Fi Direct, you need to first set up the Wi-Fi Direct settings from the operator panel of the printer. To 

connect the mobile device to the printer via Wi-Fi Direct, select the SSID of the printer from the list of wireless 

networks on the mobile device and enter the passphrase necessary for connection. 

1  Press the 

(Information) button. 

2  Tap the Tools tab, and then tap Admin Settings. 
3  Tap Network. 
4  Tap Wi-Fi Direct. 
5  Tap Wi-Fi Direct. 
6  Tap Enable, and then tap OK. 

When a popup message about the devices is displayed, tap Close. 

7  Tap Group Role. 
8  Tap Group Owner, and then tap OK. 
9  Tap Connection Status. 

10  Ensure no device is connected with the Wi-Fi Direct connection. 

When other device is connected (

1

is displayed on 

Connection Status

), you cannot use the Wi-Fi Direct 

connection. Disconnect the other device from the Wi-Fi Direct network. See "Disconnecting Wi-Fi Direct Network." 

11  The printer must be rebooted after you set Wi-Fi Direct. After the reboot, repeat steps from 1 to 4. 
12  Tap 

until SSID and Passphrase appears, and tap each menu to check what the SSID and passphrase is. 

To confirm the printer's SSID and passphrase, you can also print the list by tapping 

Print Passphrase 

under the 

Passphrase

menu. 

Printing