HP 7610 CR769A#A80?BADBOX Manual De Usuario

6

If Backup Fax Reception is turned on, incoming faxes will 

be stored in memory even when the printer has an error 

condition.

Note: All faxes stored in memory might be deleted 

from memory when the printer is turned off.

1.  Make sure paper is loaded in the printer.
2.  Touch 

(right arrow), and then touch 

Setup.

3.  Touch 

Tools or Fax Tools, and then touch Reprint 

Faxes in Memory. The faxes are printed in the 

reverse order from when they were received, with the 

most recently received fax printed first, and so on.

4.  To stop printing, touch 

(Cancel).

Fax reports provide useful system information about the printer.

1.  Touch 

(right arrow), and then touch 

Setup.

2.  Touch 

Fax Setup, touch  (down arrow), and then 

touch 

Fax Reports.

3.  Select the fax report you want to print, and then 

touch 

OK.

Note: If you need printed confirmation that your 

faxes were successfully sent, touch 

Confirmation and then select the desired option. 

To include an image on the first page of a fax on 

the confirmation page, select 

On (Fax Send) or  

On (Send and Receive).

For more information about fax features, such as 

blocking junk faxes or forwarding faxes, see the user 

guide. (For information about finding the user guide, 

Learn more!

By default, the printer automatically answers incoming 

calls and receives faxes.
To receive faxes manually, turn off Auto Answer from the 

printer control panel.
The printer will answer calls after the number of rings 

specified in the Rings to Answer setting.

Note: If an answering machine is connected to the 

printer, the Rings to Answer setting for the printer 

must be set to a higher number than the answering 

machine.

1.  Make sure the printer is turned on and paper is 

loaded.

2.  Touch 

(right arrow), and then touch 

Setup.

3.  Touch 

Fax Setup, and then touch Basic Fax Setup.

4.  Touch 

Auto Answer, and then select On or Off.

Note: If you have subscribed to a voicemail service 

on the same phone line that you will use for faxing, 

you cannot receive faxes automatically. You must 

be available to respond in person to incoming fax 

calls. (If you want to receive faxes automatically, 

contact your phone company to subscribe to a 

distinctive ring service or to obtain a separate 

phone line for faxing.)

Tip: The printer can store received faxes in its 

internal memory. To reprint these faxes, see 

“Reprint received faxes from memory” on this page.

If you are on the phone with another person, you can 

receive faxes manually without hanging up the phone.
1.  Make sure the printer is turned on and paper is 

loaded.

2.  Remove any originals from the document feeder tray.

Note: Set Rings to Answer to a higher number to 

allow you time to answer the incoming call before 

the printer does. Or turn off Auto Answer so that 

the printer does not automatically answer incoming 

calls.

3.  Ask the sender to start sending the fax.
4.  When you hear fax tones, touch 

Fax, and then select 

the option to start receiving fax.

Note: When the printer begins to receive the fax, 

you can hang up the phone or remain on the line. 

You might not hear fax tones during fax 

transmission.

Note: Clearing the fax log also deletes all faxes 

stored in memory.

1.  Touch 

(right arrow), and then touch 

Setup.

2.  Touch 

Tools, and then touch Clear Fax log.