be quiet! Pure Power L8 CM 630W BN182 Manual De Usuario
Los códigos de productos
BN182
11
1. INTRODUCTION
We are delighted that you have chosen to use a be quiet! power supply of the
Pure Power Series in your PC. Please read and follow all the information contained
in these instructions carefully prior to installation. The power supply is only
guaranteed to function properly if the instructions are followed thus providing
you with maximum satisfaction with this product. Should you have any further
questions, please contact our customer service. See contact information under
item 9.
Pure Power Series in your PC. Please read and follow all the information contained
in these instructions carefully prior to installation. The power supply is only
guaranteed to function properly if the instructions are followed thus providing
you with maximum satisfaction with this product. Should you have any further
questions, please contact our customer service. See contact information under
item 9.
2. WARNINGS AND SAFETy INSTRUCTIONS
Never unscrew the power supply. It may hold elements containing high voltages
after long periods of disuse and which could cause serious injury.
after long periods of disuse and which could cause serious injury.
A power supply must only be opened by an authorised technician!
Caution! Only use the supplied cable set. Using cables that were not included (e.g.
cables of older power supply unit series) may lead to defects!
cables of older power supply unit series) may lead to defects!
The warranty shall be void if opened the power supply is by an unauthorised
technician and if the warranty seal is broken. Never handle the power supply with
wet or damp hands when in operation. Never insert objects into the openings/fans
of the power supply. Operation is only permitted indoors! Outdoor use may lead
to severe damage.
Do not carry out works on the power supply if it is connected to the mains. Always
turn the mains switch to „0“ and pull out the mains plug.
In the event of a short circuit in the device, remove the mains cable and do not
use the device.
If there are traces of smoke, damaged cables and exposure to liquids, the power
supply must immediately be disconnected from the mains and must not be used.
This power supply is covered for a voltage range between 100 – 240 V~ and can
be used universally.
technician and if the warranty seal is broken. Never handle the power supply with
wet or damp hands when in operation. Never insert objects into the openings/fans
of the power supply. Operation is only permitted indoors! Outdoor use may lead
to severe damage.
Do not carry out works on the power supply if it is connected to the mains. Always
turn the mains switch to „0“ and pull out the mains plug.
In the event of a short circuit in the device, remove the mains cable and do not
use the device.
If there are traces of smoke, damaged cables and exposure to liquids, the power
supply must immediately be disconnected from the mains and must not be used.
This power supply is covered for a voltage range between 100 – 240 V~ and can
be used universally.