Bicker Elektronik Bicker BEA-560H 600 W PC-power supply BEA-560H Hoja De Datos
Los códigos de productos
BEA-560H
Operation
The PC power supply may only be operated in dry interiors. Contact with water, even by condensing air humidity, has to be
avoided under any circumstances. Operation under conditions such as extreme cold or heat, in a dusty environment and
near inflammable gases, steams or solvents is strictly forbidden as well. Always ensure an adequate ventilation.
avoided under any circumstances. Operation under conditions such as extreme cold or heat, in a dusty environment and
near inflammable gases, steams or solvents is strictly forbidden as well. Always ensure an adequate ventilation.
Derating
When operating the PC power supply in a higher temperature range such as +50…+70 °C the power drain has to be
reduced in order to decrease the load applied to the unit. This is not done automatically. The user himself has to take this
into consideration when setting up the system and allow for an adequate power reserve!
When operating the PC power supply in a higher temperature range such as +50…+70 °C the power drain has to be
reduced in order to decrease the load applied to the unit. This is not done automatically. The user himself has to take this
into consideration when setting up the system and allow for an adequate power reserve!
Example: If a 300 Watt PC power supply has to be operated at +60 °C operating temperature and a derating of 1 % / °C
within the range of +50…+70 °C is defined in the data sheet, the output load may not exceed 270 Watts.
within the range of +50…+70 °C is defined in the data sheet, the output load may not exceed 270 Watts.
Fan cooling after
In order to avoid a heat accumulation after operation, the fan can keep running for a while even after the PC power supply
is switched off. A temperature-controlled switch-off is done automatically.
In order to avoid a heat accumulation after operation, the fan can keep running for a while even after the PC power supply
is switched off. A temperature-controlled switch-off is done automatically.
Maintenance
The PC power supply does not contain any parts which need maintenance.
In case of failure, switch-off the PC power supply and pull the main plug. Repairing und therefore opening of the PC power
supply has to be done by a qualified technician or repair shop.
supply has to be done by a qualified technician or repair shop.
Disposal
Electrical and electronic devices may not be disposed off with domestic waste!
At the end of its useful life, dispose of the product according to the respective legal regulations.
These operating instructions are a publication of Bicker Elektronik GmbH, Zirgesheimer Str. 31, D-86609 Donauwörth.
Errors, mistakes as well as modifications of engineering and equipment are reserved.
© 14.09.2010 by Bicker Elektronik GmbH
Errors, mistakes as well as modifications of engineering and equipment are reserved.
© 14.09.2010 by Bicker Elektronik GmbH
Bicker Elektronik GmbH || Zirgesheimer Straße 31 || 86609 Donauwörth || Germany
Tel. +49 906 70595-0 || Fax +49 906 70595-55 || E-Mail info@bicker.de || www.bicker.de
Operating instructions
2/2