Fujitsu ESPRIMO P7935 VFY:P7935PXD31IT Hoja De Datos

  

A26361-K1006-Z220-1-7619, edition 2 

31 

 

As the device has to be shut down in order to install/deinstall system hardware 
components, it is a good idea to print out the relevant sections of this chapter. 
It may be necessary to update the BIOS when carrying out a system expansion or 
hardware upgrade. Additional information is contained in the "BIOS Setup" manual or 
possibly in the manual for the mainboard. 
When installing components that become very hot, make sure that the maximum 
permissible temperature is not exceeded. 
The following illustrations may differ slightly from your device, depending on its 
configuration level.   

 

 

The device must be switched off when installing/removing the system expansions and may 
not be in the energy-saving mode. 
Remove the power plug before opening the device. 

 
This chapter describes all the activities required to modify your device hardware (e.g. installing 
boards or drives). 
Read the supplied documentation before installing new drives and/or boards. 
Refer to the manual for the mainboard before making any extensions to the mainboard. 

Take care with the locking mechanisms (catches and centring pins) when you are replacing boards 
or components on boards. 
To prevent damage to the board or the components and conductors on it, please take care when you 
insert or remove boards. Make sure expansion boards are inserted straight. 
Never use sharp objects (screwdrivers) for leverage. 

 

Boards with electrostatic sensitive devices (ESD) are identifiable by the label 
shown. 
When you handle boards fitted with ESDs, you must, under all 
circumstances, observe the following points: 
● 

You must always discharge static build up (e.g. by touching a 
grounded object) before working. 

● 

The equipment and tools you use must be free of static charges. 

● 

Always hold boards with ESDs by their edges. 

● 

Never touch pins or conductors on boards fitted with ESDs.