Renkforce E-SA9M Hi-Fi Mini Amplifier 344867 Hoja De Datos

Los códigos de productos

344867

4. Safety instructions

The warranty/guarantee will expire if damage is incurred resulting from non-compliance with
these operating instructions. We do not assume liability for any consequential damage.

Nor do we assume any liability for damage to property or personal injury caused by improper
use or failure to observe the safety instructions. In such cases the warranty/guarantee is vo-
ided.

Dear Customer: The following safety information is intended not only for the protection of the

device but also for the protection of your health. Please read the following items carefully:
• For safety and licensing (CE) reasons, unauthorised conversion and/or modifications to the

product are not permitted.

• All persons operating, installing, setting up, commissioning or servicing this device must be

trained and qualified correspondingly and observe these operating instructions.

• The device is designed according to protection class II. Only connect the amplifier to a normal

mains socket (230 V/50 Hz).

• The device must be set up correctly. Please also follow these operating instructions.
• When setting up the product, make sure that the mains cable is not pinched or damaged by

sharp edges.

• If the amplifier or its connection cable is damaged, do not touch it. First of all, de-energize the

corresponding mains socket (e.g. via the respective circuit-breaker) and afterwards carefully

pull the mains plug from the socket. Do not use the product afterwards, but take it to a specia-

list workshop.

• The product is not a toy and should be kept out of reach of children! Children cannot judge the

dangers involved when handling electrical devices.

• Do not place any containers with liquid, e.g. buckets, vases or plants in the immediate proximity

of the product. Liquids could seep into the casing and in doing so impair the electrical safety of

the device. There is furthermore a high risk of fire or of a life-threatening electric shock. If this

is the case, de-energize the respective socket (e.g. switch off circuit breaker) and only then

pull the plug-in mains unit from the socket. Disconnect all cables from the device. Afterwards,

the product must no longer be used; take it to a specialist workshop.

• Never touch the mains plug of the amplifier with wet or damp hands. There is a risk of a fatal

electric shock.

• Make sure the device is adequately ventilated when in operation. Do not cover the ventilation

openings with magazines, blankets, curtains or similar. Keep a minimum distance of approx.

15 cm to other devices.