Samsung BN59-01012A Hoja De Datos

 - English

Settings

To listen to the radio, you must connect the 
supplied FM antenna.

1.  Press the 

 button to select FM.

2.  Tune to the desired station.

Preset Tuning 1 : Press the 

 button 

to select pRESET, and then press the 78 

buttons to select a preset station.

 

- Before you can tune to preset stations, 

you must add preset stations to the 
product's memory.

Manual Tuning : Press the 

 button 

to select MANUAL, and then press the 

78 buttons to tune to a lower or higher 
frequency.

Automatic Tuning : Press the 

 

button to select MANUAL, and then press 

and hold the 78 buttons to automatically 
search the band.

Press the 

 button. 

Each time you press the button, the sound 
switches between STEREO and MONO.

In a poor reception area, select MONO for a 

clear, interference-free broadcast.

Example : Presetting FM 89.10 into memory. 
1.  Press the 

 button to select FM.

2.  Press the 78 buttons to select <89.10>.
3.  Press the 

 button. 

NUMBER flashes on the display.

4.  Press the 

 button again.

Press the 

 button before 

NUMBER disappears from the display on its 
own.

After you press the 

 button, 

NUMBER disappears from the display and 
the station is stored in memory.

5.  To preset another station, repeat steps 2 to 4. 

To tune to a preset station, press the 

 button to select pRESET, and then 

press the 78 buttons to select the preset 
station.

You can record your favorite radio broadcast on a 
inserted USB storage device.
1.  Insert a USB device into the USB jack on the 

front of the product.

2.  Press the 

 button to select FM, and 

then then press the 78 buttons to select 
the station you want to record.

3.  Press the 

 (Red) button to start recording 

the radio broadcast. Recording begins.

The recorded time is displayed on the left 
and the recording time still available, based 
on the amount of free space in the USB 
storage device, is displayed on the right.

4.  Press the e (

) button to finish your 

recording. The recording is stopped and 
saved as an .mp3 file at the same time. To 
play the recorded file, refer to "Playing Files 
on a Storage Device".

 

✎

The recorded file is saved in the Tuner folder 
which is created automatically.

 

✎

Only the 

5V 0.5A

 (OpEN/CLOSE), 

5V 0.5A

 (pOWER), e 

(

),   (

), and 

/ 

, buttons are 

operable while FM radio is being recorded. 

 

✎

If you don't press any buttons while recording, 
the screen saver will be enabled.

 

✎

Sound effects, such as DSP, EQ, etc., are not 
recorded during FM radio recording.

 

✎

The radio is recorded at a set, default volume 
even if you change the volume or press the   
(

) button during the recording process.

 

✎

If you remove the USB device or Power Cable 
during the recording process, the portion of 
the file which has already been recorded may 
not play back.

 

✎

Recording will not start if the remaining free 
space in the USB storage device is less than 
2MB.

 

✎

If the USB device is removed or has insufficient 
space (under 2MB), the appropriate message 
is displayed and the recording stops.