Roadstar HIF-1799T Manual De Usuario

English

31) PHONO BUTTON

32) CD STOP BUTTON

33)TOP COVER MECHANISM

REMOTE CONTROL

BATTERY INSTALLATION
the infra-red transmitter requires 2 pcs CR-2025 size battery for operation.

CONNECTING TO POWER

Before switching on make sure that the voltage of your electricity supply is the same as

that indicated on the rating plate.

For your own safety read the following instructions carefully before attempting to connect

this unit to the mains.

MAINS (AC) OPERATION

This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other

power sources may damage the unit.

CAUTION

To prevent electric shock disconnect from the mains before removing cover. No user

serviceable parts inside. Refer servicing to qualified service personnel.

SAFETY PRECAUTION

Do not allow this unit to be exposed to rain or moisture.

Mains Supply: 230V 50Hz - AC only

This symbol means that this unit is double insulated. An earth connection is not

required.

POWER SUPPLY

Remove the stereo carefully from the box, retaining the packaging for future use.

AC POWER OPERATION

Connect the plug to a mains power inlet 230V AC ~ 50 Hz.

MW/FM TUNER

Operation

•

Switch ON the Power Switch (15). The red Power Indicator (17) will light up.

•

Select the desired frequency band with the Band Selector

(14) for FM or (12) for MW

band.

•

Tune to the desired radio station by turning the Tuning control (21).

ANTENNA

•

For FM reception there is a built-in FM antenna wire (28) at the rear of the unit. Move the

wire around to obtain the best reception.

•

For MW reception the signals are picked up through a built-in ferrite antenna. Your may

have to orient the unit to obtain the best reception.

37) OPEN / CLOSE CD DOOR.

38) RECin cd or phono mode, press to active

recording function.

39) REPEAT BUTTON

40) PLAY/PAUSE

in cd/usb mode, press

once to start playback. press again to enter

pause mode.

41) skip/search backward

press once

to skip to previous tack.press & hold for search

backward.

42) SKIP/SEARCH forward

press once to

skip to next track, press & hold for search

forward.

43) STOP

in cd/usb mode, press to stop

playback or cancel the stored program.

44) + 10 Track Button

45) - 10 Track Button

46) RANDOM BUTTON

in cd/usb mode,

press to active random function.

47) DELETE button

48) PROGRAM in CD/USB mode, press to

active programming function.