Sony BDV-N5200W BDVN5200WB Hoja De Datos
Los códigos de productos
BDVN5200WB
20
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-13(1)
D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200
(PMRF 02)\4485800131_GB (CEK)\040GET.fm
(PMRF 02)\4485800131_GB (CEK)\040GET.fm
masterpage: Left
Gett
ing Start
e
d
Step 1: Installing the
Speakers
Speakers
Install the speakers by referring to the
illustration below.
To assemble the speakers, refer to the
supplied “Speaker Installation Guide”.
illustration below.
To assemble the speakers, refer to the
supplied “Speaker Installation Guide”.
A
Front left speaker (L)
B
Front right speaker (R)
C
Center speaker
D
Surround left speaker (L)
E
Surround right speaker (R)
F
Subwoofer
G
TV
Installing the surround speakers
in rear position
(Speaker layout: [Standard])
in rear position
(Speaker layout: [Standard])
Installing all speakers in front
position
(Speaker layout: [All Front])
position
(Speaker layout: [All Front])
• Be sure to select the speakers layout
setting (page 47) according to your
speakers placement.
speakers placement.
• Use caution when placing the speakers
and/or speaker stands attached to the
speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or
discoloration may result.
speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or
discoloration may result.
• Do not lean or hang on a speaker, as it
may fall down.
• The speakers of this system are not
magnetically shielded. This may result in
color irregularity when they are placed
near a CRT TV or projector.
color irregularity when they are placed
near a CRT TV or projector.
• In order to output more effective sound
when [All Front] setting is selected, we
recommend you to install your front
speakers and surround speakers closer to
each other.
recommend you to install your front
speakers and surround speakers closer to
each other.
• You can install the speakers on a wall. For
details, refer to the supplied “Speaker
Installation Guide”.
Installation Guide”.
Step 2: Connecting the
System
System
Do not connect the AC power cord
(mains lead) of the main unit to a wall
outlet (mains) until all the other
connections are made.
(mains lead) of the main unit to a wall
outlet (mains) until all the other
connections are made.
When you connect other equipment with a
volume control, turn down the volume of
the equipment to a level where sound is
not distorted.
volume control, turn down the volume of
the equipment to a level where sound is
not distorted.
Getting Started
F
D
E
A G C B
DA G C B E
F
Note
Tip
Note