Renkforce R-2000U STEREO-RECEIVER 29265c4 Hoja De Datos

A drone is audible:
•  The cinch cable is defective.
•  When playing back via a record player: Connect the ground cable of the record player to the receiver or

try disconnecting the connection. 

Radio reception is bad:
•  Check that the aerial is connected correctly.
•  Place the cable aerial differently.
•  Do not place the cable aerial on or near any metal parts.
•  If the cable aerial has been shortened/cut off, good reception is no longer possible. Replace the cable

aerial.

•  Replace the cable aerial by an FM aerial with amplifier (available as accessories) or connect the recei-

ver to a cable connection with analogue radio stations.

•  Set the station more precisely.
•  Switch from stereo to mono.

No RDS possible:
•  The station offers no RDS signal.
•  Reception is bad.

The sound is bad:
•  Select a different setting for the internal equalizer.
•  Switch the surround sound off or on.
•  Observe that only a record player must be connected to the „PHONO“ input.
•  The volume is set too high.
•  Check the balance setting of the receiver.
•  Check if one or several speakers are connected with reversed polarity.

No recording possible:
•  Connect the recorder to the connection „TAPE REC“.
•  Please note the operating instructions of your recorder.

The external subwoofer does not work:
•  Only an active subwoofer can be connected to the „SUB-WOOFER LINE-OUT“ connection (subwoofer

with line input and integrated amplifier). Connection of a passive subwoofer is not possible.

•  Please note the operating instructions of your external subwoofer.

Some buttons of the IR remote control are without function:
•  These buttons (e.g. „MEM“, „CD STANDBY“, etc.) are only intended for the CD player from the same

manufacturer. These buttons have no function for the receiver.