Remington 3 SettingsAS7051 AS7051 Hoja De Datos

Los códigos de productos
AS7051
Descargar
Página de 72
3
ENGLISH
Thank you for buying your new Remington® product.
Before use, please read these instructions carefully and keep them safe. Remove all packaging 
before use.
C
 
KEY FEATURES
1  1000 Watt power handle
2  50mm thermal mixed bristle volume brush
3  30mm retractable bristle curling brush
4  21mm thermal mixed bristle brush
5 Concentrator
6  On/Off switch
7  Speed/ heat setting switch
8  Cool shot
9  Attachment release button
10  Heat proof storage bag
11  Swivel cord 
C
  PRODUCT FEATURES
•  1000 Watts
•  4 x Protection coating – *Anti static, Ceramic Tourmaline Ionic, smooth glide
* Vs standard ceramic coating
•  3 heat/speed setting including cool air
•  4 attachments to create different styles
•  3 year guarantee
A
  SAFETY CAUTIONS
1  Warning – for additional protection the installation of a residual current device (RCD) with
a rated residual operating current not exceeding 30mA is advisable. Ask an electrician for 
advice. 
2  The appliance, including its cord, must not be used, played with, cleaned or maintained 
by persons under eight years old and should at all times be kept out of their reach.
     Use, cleaning or maintenance of the appliance by children over eight or by anyone with a 
lack of knowledge, experience or with reduced physical, sensory or mental capabilities 
should only be undertaken after receiving appropriate instruction and under the 
adequate supervision of a responsible adult to ensure that they do so safely and that the 
hazards involved are understood and avoided.
3  Do not put the appliance in liquid; do not use it near water in a
bath-tub, basin or other vessel; and don’t use it outdoors.
4  Keep direct airflow away from eyes or other sensitive areas.
5  Do not let any part of the appliance touch the face, neck or scalp.
6  In use, take care that the inlet and outlet grilles are not blocked in any way as this will
cause the unit to automatically stop.
If this should occur, switch off and allow the unit to cool down.
.