Bosch Food processor MUM48R1 Red, Stainless steel MUM48R1 Hoja De Datos
Los códigos de productos
MUM48R1
12
Robert Bosch Hausgeräte GmbH
Connect and operate the appliance only in accordance with the
specifications on the rating plate. Do not use the appliance if the power
cord and/or appliance are damaged.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
specifications on the rating plate. Do not use the appliance if the power
cord and/or appliance are damaged.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
,
Safety instructions for this appliance
Risk of injury
Risk of electric shock!
Do not insert mains plug until all preparations for working with the appliance
are complete. Never immerse the base unit in liquid or hold under running
water. Do not use a steam cleaner.
Do not adjust the swivel arm while the appliance is switched on.
Wait until the drive has come to a standstill.
Do not change tool/accessory until the drive is at a standstill – when the
appliance is switched off, the drive continues running briefly.
Use only the rotary switch to switch the appliance on or off.
When the appliance is not in use, pull out the mains plug.
Before eliminating a fault, pull out the mains plug.
The appliance restarts following a power interruption.
Risk of injury from the rotating tools!
Keep hands clear of rotating parts. While the appliance is operating, keep
fingers clear of the mixing bowl.
Do not change tools until the drive has come to a standstill – when the
appliance is switched off, the drive continues running briefly.
The appliance may only be operated when the unused drives have been
safeguarded with the drive covers (4, 7).
Risk of injury from sharp blades/rotating drive!
Never place fingers in the attached blender!
Never assemble blender on the base unit. Do not remove/attach the
blender until the drive is at a standstill!
Operate the assembled blender only and with the lid attached.
Do not touch blender blades with bare hands.
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0.5 litres of hot or frothing liquid.
Important!
Use only one tool or accessory at any one time.
Risk of electric shock!
Do not insert mains plug until all preparations for working with the appliance
are complete. Never immerse the base unit in liquid or hold under running
water. Do not use a steam cleaner.
Do not adjust the swivel arm while the appliance is switched on.
Wait until the drive has come to a standstill.
Do not change tool/accessory until the drive is at a standstill – when the
appliance is switched off, the drive continues running briefly.
Use only the rotary switch to switch the appliance on or off.
When the appliance is not in use, pull out the mains plug.
Before eliminating a fault, pull out the mains plug.
The appliance restarts following a power interruption.
Risk of injury from the rotating tools!
Keep hands clear of rotating parts. While the appliance is operating, keep
fingers clear of the mixing bowl.
Do not change tools until the drive has come to a standstill – when the
appliance is switched off, the drive continues running briefly.
The appliance may only be operated when the unused drives have been
safeguarded with the drive covers (4, 7).
Risk of injury from sharp blades/rotating drive!
Never place fingers in the attached blender!
Never assemble blender on the base unit. Do not remove/attach the
blender until the drive is at a standstill!
Operate the assembled blender only and with the lid attached.
Do not touch blender blades with bare hands.
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0.5 litres of hot or frothing liquid.
Important!
Use only one tool or accessory at any one time.
en