Samsung LE-46A856S1MXXU Manual De Usuario

Cable Connection for a DHCP Environment

The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP 

address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them 

manually.

1.  Connect the [LAN] port on the rear panel of the TV and the external modem with a LAN Cable.
2.  Connect the LAN port on the wall and the external modem with a Modem Cable.

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 

seconds and then try again.

For the connections between the external modem and the Sharer (Router), refer to the owner’s manual of the corresponding 

product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router).

You cannot use a manual-connection-type ADSL modem becaus;e it does not support DHCP. You have to use an automatic-

connection-type ADSL modem.



N
N

N

N
N

BN68-01701A-ENG.indb   26

2008-08-12   �� 5:07:32