DJI 0360005 Hoja De Datos

9 |

Basic Flying

Control Mode Knowledge

Please read the Control Mode Knowledge clearly before usage, to know how to control the aircraft.

Different control modes will give you different flight performances. Please make sure you understand the features

and differences of the three control modes.

GPS ATTI. Mode

（With GPS Module）

ATTI. Mode

Manual Mode

Rudder Angular

Velocity

Maximum rudder angular velocity is 150°/s

Command

Linearity

YES

Command Stick

Meaning

Multi attitude control; Stick center position for 0˚

attitude, its endpoint is 35˚.

Max-angular velocity is 150°/s.

No attitude angle limitation

and vertical velocity locking.

Altitude Lock

Maintain the altitude best above 1 meter from ground.

Stick Released

Lock position if GPS signal

is adequate.

Only attitude stabilizing.

NOT Recommend

GPS Lost

When GPS signal has been

lost for 3s, system enters

ATTI. Mode automatically.

Only performing attitude

stabilizing without

position lock.

---

Safety

Attitude & speed mixture control ensures stability

Depends on experience.

Enhanced Fail-Safe(Position

lock when hovering)

Auto Level Fail-Safe

(Attitude stabilizing)

With GPS/Compass module and the failsafe requirements are satisfied, in each Control

Mode (including GPS Mode, ATTI. Mode, Manual Mode and IOC Mode), the aircraft will

enter the failsafe Mode.

Applications

AP work

Sports flying.

---

Start & Stop Motor Knowledge

(1)

Both Immediately Mode and Intelligent Mode are available in the Assistant Software:

Advanced->Motor->Stop Type.

(2)

Stop Motor method is defaulted to Immediately Mode.

Please get to know well about this section before flying.

Start Motor: Pushing throttle stick before takeoff will not start the motors. You have to execute any one of

following four Combination Stick Commands (CSC) to start the motors: