Grothe Video door intercom Corded Complete kit 74576 Detached Anthracite, White 74576 Hoja De Datos

Los códigos de productos
74576
Descargar
Página de 88
0
DS17-06A
6.  
WARNINGS FOR INSTALLERS
Read the notes in this manual carefully. This manual contains important information on safe installation, use and maintenance.
This devices in the kit must only be put to the use for which they were intended. All other use is improper. The manufacturer cannot be held
responsible for damage deriving from improper, incorrect or unreasonable use.
Each part was designed to be compliant with the standards in force.
The system must be built in compliance with the regulations in force. All devices in the system must be exclusively used for the purpose for
which they were designed.
Remove the components from the packaging and check that they are intact.
Keep the packaging (plastic bags, polystyrene, etc.) away from children. Packaging is potentially dangerous.
Provide a suitable cut-off and protection master switch upstream from the devices, with contacts open by at least 3 mm.
Make sure that the plate data corresponds to the power specifications before connecting the devices to the mains.
Keep the ventilation or cooling openings and slots free.
disconnect the devices from the mains before cleaning or maintenance.
Do not use spray products to clean the device.
Disconnect power from the circuit breaker in the event of failure and/or malfunctioning of the products contained in the kit. Do not tamper
with the devices.
Exclusively contact a service centre authorised by the manufacturer for repairs.
Provide suitable ventilation.
Do not use power extension wires.
Have the device checked and repaired by qualified personnel in the case of infiltration of fluid or objects inside the device.
Exclusively use the spare parts supplied by the manufacturer for repairs.
Installers must make sure that user’s information is applied to the connected devices.
Disrespect of these precautions can effect safety of the devices.
Keep this manual with the device at all times.
The lightening symbol in a equilateral triangle indicates the presence of dangerous voltage.
Never open the devices unless expressly instructed to do so in this instruction manual.
The exclamation mark symbol in an equilateral triangle indicates critical safety components. Always only use components supplied by the
manufacturer.
7. VIDEO DOOR PHONE INSTALLATION
The device is ready to be installed in flush mounting boxes using the various holes in the metal bracket according to the box.
Install box at indicated height.
Fix the bracket to the flush-mounting box.
connect.
Fix the video door phone to the bracket.
1,5
0m (*
)
Installation in 503 box
Installation in Ø 60 mm box
B3
B3
1,4
5m (*
)
(*) In order to guarantee compliance with reference standards for use by disabled users (e.g. Law 2005-102 of 11/02/2005, Decree 2006-555 of
17/05/2006 and amendments of 01/08/2006, 26/02/2007 and 21/03/2007 for France), the video door phone screen must be positioned at the 
height in the range from 0.90 and 1.30 m.
7.1.   DESCRIPTION OF TERMINALS
]
PoW
Power voltage input from power supply unit (C)
]
line
Bus line
z
}
Output for connecting supplementary ringers (OP2)
K