Medisana WL450 45105 Hoja De Datos

By pressing the L-Mode-button        you activate the luminous element     , 
the       icon appears on the display and the level (0 - 20) of brightness. 
The  level  of  brightness  increases  in  increments  from  0  to  20.  Press  the 
buttons       or      to adjust the brightness as desired.                              

G

If you press the L-Mode-button        a second time, the light darks down 
gradually from setting number to 0, and the            icon disappears. For 
reading,  we  recommend  brightness  level  20.  Subsequently,  the  relax 
mode  is  activated,  in  which  the  colour  of  light  changes  about  every  8
seconds  in  this  sequence:  Red  -  blue  -  green  -  red/blue  -  blue/green  -
green/red  -  red/blue/green.  Press  the  buttons              or            to  adjust  the 
brightness as desired.                                                                             

G

If  you  press  the  L-Mode-button                a  third  time,  all  light  functions  will
be switched off.                                                                                  

G

















With the Alarm-button       you activate alarm1 and/or alarm 2. Depending
on  the  rate  of  keystrokes, AL1  (for  alarm1)  and/or AL  2(for  alarm  2)  are 
displayed  and  are  activated  therewith.  With  the  fourth  press  on  the  Al-
arm-button      all alarms will be deactivated.                                          

G

In  the  last  30  minutes  before  an  activated  alarm  starts,  the  brightness 
slowly adjusts to the brightness set for the alarm time. The volume selec-
ted  for  the  alarm  time,  increases  from  the  start  of  the  alarm  (when  the 
alarm  time  is  reached)  to  the  set  value  within  60  seconds.  The  regular 
alarm  is  only  activated,  if  there  are  more  than  30  minutes  between  the 
time when the alarm is set and the time at which the alarm is supposed to 
be triggered. If there is less than 30 minutes between the time when the 
alarm is set and the time at which the alarm is supposed to be triggered, 
the alarm function will start 60 seconds before the setting time.            

G

Pressing  the  Off  button            switches  off  the  alarm  -  the  settings  will  be 
kept for the next day. The alarm automatically switches off after 30 minu-
tes.                                                                                                        

G







With the Zizz-button         you can set a short time alarm (e.g. for taking a
short  break).  Pressing  the  button  once  sets  an  alarm  to  begin  after  15
minutes.  Each  further  press  of  the  button  extends  the  alarm  time  by  15
minutes  (until  max.  90  minutes).  It  starts  the  countdown  to  the  desired 
alarm time once the icon stops flashing.                                                 

G

Pressing the Off button      switches off the alarm. The alarm automatically 
switches off after 30 minutes.                                                                      

G





With the Demo / Snooze / Quick Check-button       you can select differ-
ent functions depending on the current state of the device settings: 
1. In case of deactivated alarm: 
Demonstration function for all light and sound effects. The entire demo
process takes about 1 minute.
2. In case of set / activated alarm function:
Quick-Check function to check the settings of the alarm function. After dis-
play of all values, the Quick-Check function will be closed automatically.
3. In case of activated and effected alarm:
Snooze funcion. When the button is pressed within 30 minutes before
the set alarm time, the wake up function (including light and sound) will
stop until the setting time.

