Blade Nano QX BNF BLH7680 Hoja De Datos

TIP: These are all possible with the RTF transmitter. When using a computer transmitter, however, increase the 
travel beyond 100% on aileron, elevator or rudder for maximum control authority.

• Forward Flight
• Backward Flight
• Skidding Takeoffs

• Pirouettes
• Spot Landings
• Skidding Landings 

• Circuits (Circles)
• Figure 8s
•  Flips and Rolls

Once you have gained experience and confi dence in hovering the nano QX, you can attempt more advanced 
maneuvers including:

•  When comfortable with low-level hovering, you can transition to hovering and fl ying the nano QX at higher altitudes of 

three to four feet. At these higher altitudes, you will become comfortable with the fl ight characteristics of the aircraft.

•  Don’t be afraid to set the nano QX down on the ground quickly by lowering the throttle when approaching walls or 

other obstacles to help prevent propeller strikes.

Make sure the battery is not connected before cleaning. Remove dust and debris with a soft brush or 
a dry, lint-free cloth. 

Replace the motor when the model will not fl y steady or veers off when doing a climb out.

Make sure the wiring does not block moving parts. Replace damaged wiring and loose connectors.

Make sure there are no loose screws, other fasteners or connectors. Do not over-tighten metal 
screws in plastic parts. Tighten screws so the parts are mated together, then turn screw only 1/8th 
of a turn more.

Make sure there is no damage to the propellers or other parts that move at high speed. Damage to 
these parts includes cracks, burrs, chips or scratches. Replace damaged parts before fl ying.