Blade Nano QX BNF BLH7680 Hoja De Datos

Nano QX control response is 
inconsistent or requires extra 
trim to neutralize movement.

Aircraft not initialized on a level sur-
face.

Disconnect the fl ight battery, center the 
control trim and re-initialize the quadcopter.

Battery not correctly placed in
battery slot.

Adjust battery position so quadcopter bal-
ances in the center of the frame.

Nano QX will not respond to 
throttle.

Throttle too high and/or throttle trim 
is too high

Reset controls with the throttle stick
and throttle trim at the lowest setting.

nano QX moved during initialization.

Disconnect the flight battery and re-
initialize the nano QX while keeping the 
quadcopter from moving.

Throttle channel is reversed.

Disconnect fl ight battery, reverse the 
throttle channel on the transmitter, 
recconnect fl ight battery.

Nano QX does not function
and smells burnt after con-
necting the fl ight battery.

Flight battery connected with the 
wrong polarity.

Replace the 4-in-1 board. Connect the 
fl ight battery noting proper polarity.

Nano QX has reduced fl ight 
time or is underpowered.

Flight battery charge is low.

Completely recharge the fl ight battery.

Inadequate power to fl ight battery 
charger.

Use a different USB power source for the 
charger.

Flight battery is damaged.

Replace the fl ight battery and follow the 
fl ight battery instructions.

Flight conditions might be too cold.

Make sure the battery is warm (room tem-
perature) before use.