Joy It Kit PC / Barebone without drives 4 ATi Radeon™ 3000 onBoard graphics Motherboard Gigabyte GA-78LMT-S2P JI FX-4100 Hoja De Datos

Los códigos de productos
JI FX-4100
Descargar
Página de 44
- 31 -
BIOS Setup
2-7  Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Power Management Setup
 ACPI Suspend Type  
[S3(STR)]
 Soft-Off by Power button
[Instant-off]
 USB Wake Up from S3
[Enabled]
 Modem Ring Resume  
[Disabled]
 PME Event Wake Up  
[Enabled]
  HPET Support 
(Note)
[Enabled]
 Power On By Mouse  
[Disabled]
 Power On By Keyboard
[Disabled]
x  KB Power ON Password
Enter
 AC Back Function
[Soft-Off]
 Power-On by Alarm  
[Disabled]
x  Date (of Month)   
 
 
 Everyday
x  Resume Time (hh:mm:ss) 
 
 0 : 0 : 0
 ErP Support
[Disabled]

: Move 
Enter: Select 
+/-/PU/PD: Value 
F10: Save 
ESC: Exit 
F1: General Help
 
F5: Previous Values 
F6: Fail-Safe Defaults   
F7: Optimized Defaults
Item Help
Menu Level 
  ACPI Suspend Type 
 
Specifies the ACPI sleep state when the system enters suspend. 
 
S1(POS)   
 Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 
sleep state, the system appears suspended and stays in a low power mode. The 
system can be resumed at any time.
 
S3(STR)   
 Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state (default). In 
S3 sleep state, the system appears to be off and consumes less power than in the 
S1 state. When signaled by a wake-up device or event, the system resumes to its 
working state exactly where it was left off.
  Soft-Off by Power button
 
Configures the way to turn off the computer in MS-DOS mode using the power button. 
 
Instant-Off   
Press the power button and then the system will be turned off instantly. (Default)
 
Delay 4 Sec.   Press and hold the power button for 4 seconds to turn off the system. If the power 
button is pressed for less than 4 seconds, the system will enter suspend mode.
(Note)  Supported on Windows 7/Vista operating system only. 
  Onboard USB 3.0 Controller (Etron EJ168 USB Controller) j
 
Enables or disables the Etron EJ168 USB controller. (Default: Enabled)
  USB Controllers
 
Enables or disables the integrated USB controllers. (Default: Enabled)
 
Disabled will turn off all of the USB functionalities below.
  USB Legacy Function
 
Allows USB keyboard to be used in MS-DOS. (Default: Enabled)
  USB Storage Function
 
Determines whether to detect USB storage devices, including USB flash drives and USB hard drives 
during the POST. (Default: Enabled)
  Onboard Serial Port
 
Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. 
Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.
 j  Only for GA-78LMT-USB3.