Renkforce Wireless Surveillance Kit808578 Resolution (TVL) 420 TVL 808578 Hoja De Datos

In the OSD menu, use the buttons „4“ and „6“ to choose the submenu „Record Setup“ and then push the 

button „PLAY/ENTER“ on the DVR or the button „

“ on the IR remote control.

Function „Motion Detect Activity“
The DVR can automatically start a recording if one of the radio cameras recognises a movement (e.g. if a 

person of vehicle moves in the monitoring area. 

  The sensitivity in motion detection can be set in 3 levels in the function „Motion Sensitivity“, see 

below.

Proceed as follows:
•  Use the buttons „4“ and „6“ to choose the submenu „Motion Detect Activity“ and then push the button 

„PLAY/ENTER“ on the DVR or the button „

“ on the IR remote control. 

•  Use the buttons „4“ and „6“ to switch between „On“ (motion detection on) and „Off“ (motion detection 

off).

•  Confirm selection with the button „PLAY/ENTER“ on the DVR or the button „

“ on the IR remote cont-

rol.

•  Push the button „MENU/ESC“ on the DVR or the button „MENU“ on the IR remote control repeatedly to

return to the respective previous menu or leave the OSD menu.

Function „Motion Record Time“
Set the recording duration here when the motion detection (see above, function „Motion Detect Activity“) 

was triggered. 
Proceed as follows:
•  Use the buttons „4“ and „6“ to choose the submenu „Motion Record Time“ and then push the button 

„PLAY/ENTER“ on the DVR or the button „

“ on the IR remote control. 

•  Use the buttons „4“ and „6“ to switch between a recording duration of 15 seconds, 30 seconds and 1 

minute. 

•  Confirm selection with the button „PLAY/ENTER“ on the DVR or the button „

“ on the IR remote cont-

rol.

•  Push the button „MENU/ESC“ on the DVR or the button „MENU“ on the IR remote control repeatedly to

return to the respective previous menu or leave the OSD menu.