Renkforce Wireless Surveillance Kit808578 Resolution (TVL) 420 TVL 808578 Hoja De Datos

Function „Zoom“
Activate a digital zoom with this to indicate the video display of the radio camera twice as large. If the 

enlarged image of the radio camera is displayed, you can move the visible image section with the four 

arrow buttons.
Proceed as follows:
•  Use the buttons „4“ and „6“ to choose the submenu „Zoom“ and then push the button „PLAY/ENTER“ 

on the DVR or the button „

“ on the IR remote control. 

•  Use the buttons „4“ and „6“ to switch between „x1“ (normal display) and „x2“ (zoom).
•  Confirm selection with the button „PLAY/ENTER“ on the DVR or the button „

“ on the IR remote cont-

rol.

•  Push the button „MENU/ESC“ on the DVR or the button „MENU“ on the IR remote control repeatedly to

return to the respective previous menu or leave the OSD menu.

  The volume cannot be set in zoom mode, since the arrows are used to move the visible section 

of the screen here. Briefly switch to the quad or auto mode (see chapter 10 d) and then set the 

volume as desired.

Function „Upgrade“
This function is used to perform a firmware upgrade by the manufacturer. 
If there is a firmware upgrade available for the DVR, it is provided at www.conrad.com on the respective 

product page with a description for the precise procedure.