QNAP HS-251 Manual De Usuario

Descargar
Página de 344
160
5.5.1  Joining NAS to Active Directory (Windows Server 2003/2008/2012)
Active Directory is a Microsoft directory used in Windows environments to centrally
store, share, and manage the information and resources on the network. It is a
hierarchical data centre which centrally holds the information of the users, user groups,
and the computers for secure access management. The NAS supports Active Directory
(AD). By joining the NAS to the Active Directory, all the user accounts of the AD server
will be imported to the NAS automatically. The AD users can use the same set of
username and password to login the NAS. If you are using Active Directory with
Windows Server 2008 R2, you must update the NAS firmware to V3.2.0 or above to join
the NAS to the AD.
Joining the  NAS to Ac tiv e  Dire c tory  M a nua lly
Follow the steps below to join the QNAP NAS to the Windows Active Directory.
1. Login the NAS as an administrator. Go to "System Settings" > "General Settings" >
"Time". Set the date and time of the NAS, which must be consistent with the time
of the AD server. The maximum time difference allowed is 5 minutes.
2. Go to "System Settings" > "Network" > "TCP/IP". Set the IP of the primary DNS
server as the IP of the Active Directory server that contains the DNS service. It
must be the IP of the DNS server that is used for your Active Directory. If you use
an external DNS server, you will not be able to join the domain.
3. Go to "Privilege Settings" > "Domain Security". Enable "Active Directory
authentication (domain member)", and enter the AD domain information.
Note : 
Enter a fully qualified AD domain name, for example, qnap-test.com
The AD user entered here must have the administrator access right to the AD
domain.
WINS Support: If you are using a WINS server on the network and the
workstation is configured to use that WINS server for name resolution, you must
set up the WINS server IP on the NAS (use the specified WINS server.)
Joining the  NAS to Ac tiv e  Dire c tory  (AD) by  Q uic k C onfigura tion Wiza rd
To join the NAS to an AD domain by the Quick Configuration Wizard, follow the steps
below.
1. Go to "Privilege Settings" > "Domain Security". Select "Active Directory