Omnitronic USB Turntable 10603043 Hoja De Datos

Los códigos de productos

10603043

00042058.DOC, Version 1.0

24/24

5 For optimized pick-up the overhang – the distance between the stylus and the axle of the turntable –

should be set to 15 mm. Make sure that the system is centered (correct azimuth) and the screws are
fixed (Fig. 9).

6 After replacing the phono cartridge system, readjust the stylus pressure and the anti-skating value

(chapters 5.3 and 5.4).

Fig. 9: Adjusting the azimuth

10.2 Replacement headshell

A replacement headshell (e. g. the headshell S-15 from OMNITRONIC) including a phono cartridge system
allows an immediate replacement, if required. The headshell can easily be replaced by unscrewing the
existing one and screwing on the new one. After the replacement readjust the stylus pressure and the anti-
skating value (chapters 5.3 and 5.4).

11. TECHNICAL SPECIFICATIONS

Power supply:

115/230 V AC, 50/60 Hz ~

Power consumption:

8 W

Type: manual

turntable

Drive method:

belt drive

Motor: DC

motor

Turntable platter:

plastic, Ø 330 mm

Speed: 33⅓ RPM and 45 RPM
Change time between speeds: <1 sec
Start time:

<1 sec

Stop time:

<1 sec

Pitch adjustment:

±10 %

Wow and flutter:

<0.25 % WRMS/ 33 RPM

Rumble:

>50 dB DIN B

Tone arm:

S-shape with Cardan's suspension

Tone arm length:

220 mm

Overhang: 10

Anti-skating range:

0-4 g

Stylus pressure range:

3-4 g

Applicable cartridge weight:

6-10 g

Phono output level:

1.5-3.6 mV/ 1 kHz 5 cm/sec

Line output level:

90-216 mV/ 1 kHz 5 cm/sec

Frequency range:

20 Hz - 20 kHz

Channel separation:

>15 dB

Output connectors:

RCA, USB type B

Dimensions:

450 x 360 x 145 mm

Weight: 4