Intel 887 AV8062701085401 Hoja De Datos

•

Multiple frequency and voltage points for optimal performance and power

efficiency. These operating points are known as P-states.

•

Frequency selection is software controlled by writing to processor MSRs. The

voltage is optimized based on the selected frequency and the number of active

processor cores.
— Once the voltage is established, the PLL locks on to the target frequency.
— All active processor cores share the same frequency and voltage. In a multi-

core processor, the highest frequency P-state requested among all active

cores is selected.

— Software-requested transitions are accepted at any time. If a previous

transition is in progress, the new transition is deferred until the previous

transition is completed.

•

The processor controls voltage ramp rates internally to ensure glitch-free

transitions.

•

Because there is low transition latency between P-states, a significant number of

transitions per-second are possible.

When the processor is idle, low-power idle states (C-states) are used to save power.

More power savings actions are taken for numerically higher C-states. However,

higher C-states have longer exit and entry latencies. Resolution of C-states occur at

the thread, processor core, and processor package level. Thread-level C-states are

available if Intel Hyper-Threading Technology is enabled.

Long term reliability cannot be assured unless all the Low-Power Idle States are

enabled.

Thread 0

Thread 1

Core 0 State

Thread 0

Thread 1

Core N State

Processor Package State

5th Generation Intel

®

 Core

™

 Processor Family, Intel

®

 Core

™

 M Processor Family, Mobile Intel

®

 Pentium

®

 Processor Family, and

Mobile Intel

®

 Celeron

®

 Processor Family

March 2015

Datasheet – Volume 1 of 2

Order No.: 330834-004v1

47