Intel Core 2 Duo E7300 BX80570E7300 Manual De Usuario
Los códigos de productos
BX80570E7300
ATX Thermal/Mechanical Design Information
Thermal and Mechanical Design Guidelines
63
6.7.2
Mechanical Interface to the Reference Attach Mechanism
The attach mechanism component from the reference design can be used by other 3
rd
party cooling solutions. The attach mechanism consists of:
A metal attach clip that interfaces with the heatsink core, see
Four plastic fasteners, see
The clip is assembled to heatsink during copper core insertion, and is meant to be
trapped between the core shoulder and the extrusion as shown in Figure
trapped between the core shoulder and the extrusion as shown in Figure
Figure
6-6. Reference Clip/Heatsink Assembly
Core shoulder
traps clip in place
traps clip in place
Core shoulder
traps clip in place
traps clip in place
Clip
The mechanical interface with the reference attach mechanism is defined in Figure
and Figure
6-8. Complying with the mechanical interface parameters is critical to
Additional requirements for the reference attach mechanism (clip and fasteners)
include:
Heatsink/fan mass ≤ 550 g (i.e., total assembly mass, including clip and fasteners
< 595 g
Whole assembly center of gravity ≤ 25.4 mm, measured from the top of the IHS
Whole assembly = Heatsink + Fan + Attach clip + Fasteners