Mobi Technologies MOBICAM 70062 Manual De Usuario

12

PROBLEM 

     

Screen turns on and off

No reception at Monitor 

No picture display but can 

hear sound 

Only Black & White picture 

displayed
Batteries cannot be recharged

Camera will not link

Channels Keep Switching 

Back and Forth

   NORMAL SOLUTIONS

•  The “VOX” mode is selected on the camera,

   when there is no noise detected by the camera

   it stops transmitting to save power. To turn off

   select “OFF” under the “VOX” settings

   switch.
•  Unit has not been switched on.

•  AC/DC adaptor has not been connected.

•  Adjust the position of the Camera or Monitor.

•  No Battery Power (check LED indicator)

•  The transmitter may not be transmitting.

   (either not powered on or in VOX mode)

•  Wrong Channel is selected on Monitor
•  Check if the LCD on/off switch.

•  Low Power (Check the LED indicator)

•  Check to make sure units are linked properly
•  Check if transmitter has switched to night

   vision mode.
•  AC/DC adaptor has not been connected.

•  Non-rechargeable battery has been used.

•  Only special designed rechargeable batteries

   can be recharged. Please contact the manufac-

   turer if you have any questions.
•  Unit has not been switched on.

•  AC/DC adaptor has not been connected.

•  Check to make sure you are making contact

   with the link button.

•  Check to make sure you are selecting the cor

   rect channel
•  Check to make sure you are not in scan mode.

   To stop this feature use the channel selection

   switch on the monitor and select the desired

   channel