MTX Audio F-150 SUPERCREW Manual De Usuario

READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING

MOUNTING LOCATION: The enclosure mounts on the driver’s side
under rear seat on Ford F-150 SuperCrew.

TOOLS REQUIRED FOR INSTALLATION:

Wire Cutters

5/16” Wrench

Terminal Crimpers

1/2" Socket

INSTALLATION: Follow the steps below

1. Remove the 2 plastic bolt covers. Press down and slide forward.

Remove the 3 seat bracket bolts, flip bottom of seat up and place enclo-
sure under seat.

Plastic Covers

2. If externally amplified make speaker connections to the enclosure

from the amplifier; loosen terminal knobs (a 13-mm nut driver can be
used). Connect speaker wires from amplifier to enclosure, positive to red
terminal knob and negative to black terminal knob. Refer to Step 19 for
mounting directions.

AMPLIFIED THUNDERFORM

Routing Power Wire; we recommend a connection directly to the
battery.

3. Remove both passenger's side threshold trim; pull up on trim, it will

remove easily.

Conventional Wiring of Aftermarket Radio

_ _

20 Amp Fuse

Low Level Signal

Turn On Lead

Optional EBC

(Electronic Bass Control)