Country Home Products DR SCOUT FIELD and BRUSH MOWER Manual De Usuario

 

19 DR



 

SCOUT



 FIELD and BRUSH MOWER Safety & Operating Instructions

 

Removing and Replacing the Blade Belt 

 
 
 
 
 
 
 
 

 

9/16" wrench or socket (spring nut)

 

 

1/2" wrench or socket (guide bolt)

 

 

Gloves 

 

1.  Remove the belt guard by unscrewing the 

knob, pull the guard forward and lift to 
remove it. (Figure 11) 

2.  Remove the top nut from the clutch lever 

pivot bolt. Remove the idler tension spring 
from the shaft by gripping the spring with 
your gloved hand, pulling the spring toward 
the shaft and lifting it over the shaft.   
(Figure 12) 

3.  Remove the clutch anti-rotation bracket by 

removing the mounting bolt from side of 
the machine. (Figure 12) 

4.  Remove the clutch return 

spring by unhooking from 
the eyebolt. (Figure 12) 

5.  Remove the clutch spring 

from the clutch tab by 
rotating the tab toward 
the rear of the machine 
(clockwise) to relieve 
tension and unhook the 
spring from the tab. 
(Figure 12)

6.  Remove the belt from the 

engine pulley below the 
machine and then remove 
it from around the clutch. 
(Figure 12)

7.  To mount the belt, follow the above procedure in reverse order.

engine and disconnect the spark plug wire. 

