PASCO Specialty & Mfg. SPARKling Air Charging System PS-2577 Prospecto

I n s t r u c t i o n   S h e e t

0 1 2- 1 38 9 7 A

The PASCO model PS-2577 SPARK Charging Station is 
designed to work with a PASCO PS-2011 SPARKlink Air. The 
Charging Station can hold up to five SPARKlink Air’s at one 
time. It takes approximately five hours to fully charge five SPAR-
Klink Air’s.

The SPARKlink Air Charging Station includes a 20 watt switch-
ing power adapter (100 - 240 VAC input and 5 VDC, 4.0 A out-
put). 

Connect the plug from the power adapter to the power input jack 
on the Charging Station. The power input jack is at the midpoint 
on the upper left edge of the station. Connect the power cord 
from the power adapter to a compatible electrical receptacle.

Make sure that the SPARKlink Air is OFF before inserting it into 
one of the slots of the Charging Station. Insert as many as five 
SPARKlink Air Systems. Because the Charging Station has a 
fixed regulated power suppy, it does not matter how many of the 
five slots are filled with SPARKlink Air Systems.

As the SPARKlink Air is charging, the light emitting diode 
(LED) on the top right hand end of the SPARKlink Air will flash 
red. When the SPARKlink Air is fully charged, the LED will 
shine green continuously. The SPARKlink Air’s charging cir-
cuitry will disconnect itself from the battery when fully charged. 

Power Input Jack