Emerson Hot1 Manual De Propietario

3

HOW TO USE THIS INSTRUCTION MANUAL

Provides a step-by-step narrative describing the installation step, with check boxes that
can be marked as you progress through the installation.

Contains simple illustrations that provide visual instruction to support the narrative.

CAUTIONS, WARNINGS and DANGERS that will require your attention during the step.

These instructions are separated into main sections, indicated by numbers, and subsections,
indicated by capital letters. The manual is setup this way to allow you to take a break at any
point after completing a section or subsection without affecting the installation process. 

What you’ll see in the 
instruction manual:

1

2

3

Valve

Lever

B

■

Press valve lever down for about 20 
seconds until water freely runs out of 
the spout. Hold valve open at lease 60 
seconds to let the water run to flush 
out the lines.

 Do not connect electric power until 

tank is filled with water. Failure to do so my damage heating 
element or thermal safety fuse and will void the warranty.

1

2

An imminently hazardous situation, which, if not avoided, will result in death or serious injury.

A potentially hazardous situation, which, if not avoided, could result in death or serious injury.

A potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

3

A 115-volt grounded
outlet within 30 inches
of the dispenser is
required to provide
power to the tank.

A minimum of
3

3

⁄

4

" of space

is required 
between the 
center of the 
dispenser head
and splashboard/
wall in order for
the appliance to
operate properly.