Encore electronic ENHWI-G2 Manual De Usuario
Wireless
Wireless Access Point builds a wireless LAN and can let all PCs equipped with
IEEE802.11b/g wireless network adaptor connect to your Intranet. It supports
WEP encryption and MAC address filter to enhance the security of your wireless
network.
Basic Settings
You can set up the configuration of your Wireless and monitor the
Wireless Clients associate with your AP.
Wireless Clients associate with your AP.
Configuration
Disable Wireless LAN
Interface
To Disable interface of Wireless LAN
Band
To select a band for this device to match 802.11b,
802.11g or both.
802.11g or both.
Mode
Configure this device as AP, WDS or both.
SSID
The name of the wireless network
Country
Select the region you live.
Associated Clients
Click "Show Active Clients" button, then an "Active
Wireless Client Table" will pop up. You can see the
status of all active wireless stations that are connecting
to the access point
Wireless Client Table" will pop up. You can see the
status of all active wireless stations that are connecting
to the access point
.
Enable Universal
Repeater Mode
Repeater Mode
Mark this checkbox to enable Universal Repeater Mode
which acts this device as an AP and client
simultaneously.
which acts this device as an AP and client
simultaneously.
SSID of Extended
Interface
Interface
While you enable the Universal Repeater Mode, you
have to specify an SSID for the extended interface.
have to specify an SSID for the extended interface.
Click <Apply changes> button at the bottom of the screen to save the
above configurations. You can now configure other advance sections or
start using the router (with the advance settings in place)
above configurations. You can now configure other advance sections or
start using the router (with the advance settings in place)
17